Create a subnet

Creating resources
- Assumed system configuration
- Building a network environment
  - Creating a network
    This section explains how to create a network within a project for the deployment of resources such as a virtual server.
  - Create a subnet
    - Creating a subnet
      A subnet is required for managing private IP addresses for resources to be connected to a network, and for automatic setting of IP addresses using DHCP. This section explains how to create a subnet and then check that it was created properly.
    - Adding routing
      Configure the necessary routing information for the created subnet. This setting is necessary for concept/concept_create_nw_kanri_jp_level2.html. The following is an example procedure for the routing configuration that becomes necessary for SSL-VPN connections.
  - Creating a virtual router
    This section explains how to create a virtual router to either connect a network with an external network or to connect networks internally.
  - Changing the information of a virtual router (attaching to an external network)
    This section explains how to connect a virtual router to an external network by updating its settings.
  - Changing the information of a virtual router (attaching to a subnet)
    This section explains how to connect a virtual router to a subnet on K5 by updating its settings.
- Security group settings
- Creating a firewall
- Simple configuration for SSL-VPN connection (V2 service)
- Create a virtual server
- Confirming connection
- High-security configuration for SSL-VPN connection (V2 service)